Cordless long range technology mouse. High precision with 1.600 dpi that provide superior smooth movement. Integrates a small sized nano receiver that can be either stored in the mouse or integrate inside your laptop.

• Middle sized cordless mouse.
  
• Micro sized USB nano receiver.
  
• You can store the nano receiver inside the mouse built-in slot.
  
• With its minimum size, the receiver can be integrated inside the laptop.
  
• 2.4 GHz wireless technology for a wider range.
  
• 10 meters range.
  
• 1.600 dpi optical technology for high movement precision.
  
• 5 functional buttons and scroll wheel.
  
• Sensitivity button selector to switch between 800 and 1.600 dpi.
  
• Side buttons for faster browsing (next/previous).
  
• Plug & Play: No need for drivers.
  
• Only needs one AA battery to operate.
  
• 32 channels to avoid interferences.
  

Commutable optical sensor: 800 ~ 1600 dpi. 2.4 GHz wireless technology. Micro sized USB nano receiver. You can store the nano receiver inside the mouse built-in slot. 5 functional buttons and scroll wheel. 32 channels to avoid interferences. Plug & Play: No need for drivers. Only needs one AA battery to operate. Mouse size: 97 x 70 x 35 mm. Nano receiver size: 18 x 14 x 6 mm. Net weight: 70 grs. Compatible with Windows 98SE/2000/ME/XP/VISTA/7/Mac OSX/Linux.

R520 mouse. USB nano receiver. 1 AA battery. User manual.

Without Packaging Mouse size: 97 x 70 x 35 mm. Receiver size: 18 x 14 x 6 mm. Net weight: 70 grs.

Your opinion.

User manual Manual de usuario

Notice d'utlisation

1) If the Inpput™ R520 is going to be out of use for some hours, is necessary to disconnect the receiptor from the computer in order to waste the battery? 2) Is necessary to install any driver to use the Inpput™ R520? 3) If several of Inpput™ R520 are used in the same room, it will appear interference between each other?

Answers.

If the Inpput™ R520 is going to be out of use for some hours, is necessary to disconnect the receiptor from the computer in order to waste the battery? Is not necessary. After some minutes out of use, the Inpput™ R520 start the stand by mode. By this way the Inpput™ R520 doesn't waste energy.

Is necessary to install any driver to use the Inpput™ R520? It's not necessary, the Inpput™ R520 is plug & play; only need to connect the nano-receptor in the computer and it will start to work automatically. Just push the left or right mouse button. Then, the computer will recognize the device immdetiately.

If several of Inpput™ R520 are used in the same room, it will appear interference between each other? No, thanks to its 32 differet transmission channels is possible to use many Inpput™ R520 in the same room safely.